The tutorial below for making a bondage chest harness was created by the man behind the Twitter account Macramé for the Advanced. For various reasons, he would like to remain anonymous for now. With this tutorial, he shows step by step how to use bondage rope to make a chest harness.

About Macramé for the Advanced

The interest in rope and bondage started years ago, but only took shape after my divorce. With my current wife, my sweetheart, we went on a journey of discovery. It started with tying to the bed. This gave me satisfaction and it gave my wife peace of mind. But my and our interest went beyond tying to the bed. Shibari attracted me much more. How to make beautiful harnesses or how to fix a leg as nicely as possible. By watching a lot on YouTube and trying, I am starting to get the hang of it more and more. Very slowly this is starting to grow into a big hobby. Over 200 meters of rope we now have in stock, different types and sizes. For us the suspension is still ahead; Getting my love to hang in the ropes. I still have to practice and gain knowledge for that.

In the world of twitter, I noticed that people are curious about how you do it and how you can do it. I was being asked questions in DM. Hence the idea to start a separate twitter account which deals with this. This way I hope to be able to help tweeps on the journey of discovery that my love and I have already done in part.

Making a chest harness step by step

To make this chest harness, I used ten meters of rope.

Grab the middle of the rope and place it on your partner’s back.

Pass the rope under the breasts and then pass it through the loop you made on the back.

Go back in the opposite direction and place these two on top of the other two you already have under the breasts. Make sure the rope does not get twisted.

Pass this through the new loop you made on the back and return in the opposite direction.

You now pass at the top of the breasts. At the back you pull it back under the other rope and go back in the opposite direction. By pulling it tighter you will see that the rope becomes more vertical.

Pass the rope back through the new loop you made and then pull it forward over the shoulders.

Over the breasts are now four ropes. Pass the rope under the top two and hang them over the bottom two.

Then go to the four ropes under the breasts. Go over the bottom four and then pass it underneath in the back. You have now made a loop around the bottom four ropes. After this you weave the rope under the sloping rope. You come back to the four ropes above the chest. Weave under the bottom two and pass the rope over the top two. As in the second picture.
Left and right are mirrored and not woven the same! As in the two photo, go back over the other shoulder.

On the back, pull it over the slanted rope to the left shoulder and under the other buttons, on the left side.

Then twist it around the middle vertical piece of rope, just until you can go no further. At the last wrap, leave some space as shown in the picture.

Then put the last piece of rope through that loop, from top to bottom and pull it tight. You can now let the remaining piece hang gently without your knots coming loose.

This is how I do this chest harness. There will be plenty of other ways to do these, and I hope I’ve gotten you some way to even do it your own way.

macramévoorgevorderden
@Macrame18plus

---

Are you looking for good bondage rope? Then take a look in the shop of NBRplaza.